Merge pull request 'Initial work on rom_sd' (#2) from add_more_docs into master

Reviewed-on: #2

design/audio/audio_buffer.sv

@@ -12,9 +12,6 @@ module audio_buffer(
     input logic play, stop,
     input SPEED speed,
 
-    // Whether the current address being read from is in the upper or lower
-    // half of the 2KiB buffer
-    output logic address_half,
 
     // Whether the audio buffer is currently playing
     output logic playing,
@@ -23,11 +20,13 @@ module audio_buffer(
     output logic [15:0] sample,
 
     // Inputs for the memory buffer
-    input logic [10:0] addra,
+    audio_buffer_interface.receiver driver
-    input logic [7:0] dina,
-    input logic clka, ena
 );
 
+// Whether the current address being read from is in the upper or lower
+// half of the 2KiB buffer
+let address_half = driver.address_half;
+
 logic [9:0] address;
 
 // State register
@@ -117,16 +116,16 @@ xpm_memory_sdpram #(
 )
 buffer (
   .doutb(doutb),          // READ_DATA_WIDTH_B-bit output: Data output for port B read operations.
-  .addra(addra),          // ADDR_WIDTH_A-bit input: Address for port A write operations.
+  .addra(driver.addra),          // ADDR_WIDTH_A-bit input: Address for port A write operations.
   .addrb(address),        // ADDR_WIDTH_B-bit input: Address for port B read operations.
-  .clka(clka),            // 1-bit input: Clock signal for port A. Also clocks port B when
+  .clka(driver.clka),            // 1-bit input: Clock signal for port A. Also clocks port B when
                           // parameter CLOCKING_MODE is "common_clock".
 
   .clkb(clk),             // 1-bit input: Clock signal for port B when parameter CLOCKING_MODE is
                           // "independent_clock". Unused when parameter CLOCKING_MODE is
                           // "common_clock".
-  .dina(dina),            // WRITE_DATA_WIDTH_A-bit input: Data input for port A write operations.
+  .dina(driver.dina),            // WRITE_DATA_WIDTH_A-bit input: Data input for port A write operations.
-  .ena(ena),              // 1-bit input: Memory enable signal for port A. Must be high on clock
+  .ena(driver.ena),              // 1-bit input: Memory enable signal for port A. Must be high on clock
                           // cycles when write operations are initiated. Pipelined internally.
 
   .enb(enb),              // 1-bit input: Memory enable signal for port B. Must be high on clock
@@ -135,7 +134,7 @@ buffer (
   .rstb(reset),            // 1-bit input: Reset signal for the final port B output register stage.
                           // Synchronously resets output port doutb to the value specified by
                           // parameter READ_RESET_VALUE_B.
-  .wea(ena)               // WRITE_DATA_WIDTH_A/BYTE_WRITE_WIDTH_A-bit input: Write enable vector
+  .wea(driver.ena)               // WRITE_DATA_WIDTH_A/BYTE_WRITE_WIDTH_A-bit input: Write enable vector
                           // for port A input data port dina. 1 bit wide when word-wide writes are
                           // used. In byte-wide write configurations, each bit controls the
                           // writing one byte of dina to address addra. For example, to

design/sd/rom_sd.sv

@@ -0,0 +1,103 @@
+// A dummy sdcard module for testing the audio port
+
+module sd(
+    input logic clk,
+    input logic reset,
+    output logic ready,
+
+    audio_buffer_interface.driver audio_buffer
+);
+
+// First we write 2048B into the memory buffer, then signal to play it and
+// wait for half signal to avoid overwriting memory
+logic initializing;
+logic [16:0] rom_address;
+logic [7:0] rom_data;
+logic rom_enable;
+// Keep track of pipeline delay so we don't write garbage into the buffer
+logic delay;
+
+// Keep track of if we are caught up to the buffer or not
+logic waiting;
+//TODO: This probably could be an assign, not sure
+
+assign ready = '1;
+
+always_ff @(posedge clk) begin
+    if (reset) begin
+        delay <= 1;
+        rom_address <= 0;
+        initializing <= 1;
+        audio_buffer.addra <= 0;
+        audio_buffer.ena <= 0;
+    end
+    else if (initializing) begin
+        rom_enable <= 1;
+        case (delay)
+            1:  delay <= 0;
+            0:  begin
+                rom_address <= 1;
+                delay <= 0;
+                initializing <= 0;
+                end
+        endcase
+    end
+    else begin
+        if (!waiting) begin
+            audio_buffer.ena <= 1;
+            audio_buffer.dina <= rom_data;
+            audio_buffer.addra <= audio_buffer.addra + 1;
+        end
+
+    end
+
+    
+
+end
+
+
+// xpm_memory_sprom: Single Port ROM
+// Xilinx Parameterized Macro, version 2024.2
+
+// The ROM has 17 address bits and 8 data bits to store 128KiB, more than
+// enough for one second of 48khz audio
+xpm_memory_sprom #(
+  .ADDR_WIDTH_A(17),              // DECIMAL
+  .AUTO_SLEEP_TIME(0),           // DECIMAL
+  .CASCADE_HEIGHT(0),            // DECIMAL
+  .ECC_BIT_RANGE("7:0"),         // String
+  .ECC_MODE("no_ecc"),           // String
+  .ECC_TYPE("none"),             // String
+  .IGNORE_INIT_SYNTH(0),         // DECIMAL
+  .MEMORY_INIT_FILE("roundabout.mem"),     // String
+  .MEMORY_INIT_PARAM("0"),       // String
+  .MEMORY_OPTIMIZATION("true"),  // String
+  .MEMORY_PRIMITIVE("auto"),     // String
+  .MEMORY_SIZE(131072*8),            // DECIMAL
+  .MESSAGE_CONTROL(0),           // DECIMAL
+  .RAM_DECOMP("auto"),           // String
+  .READ_DATA_WIDTH_A(8),        // DECIMAL
+  .READ_LATENCY_A(2),            // DECIMAL
+  .READ_RESET_VALUE_A("0"),      // String
+  .RST_MODE_A("SYNC"),           // String
+  .SIM_ASSERT_CHK(0),            // DECIMAL; 0=disable simulation messages, 1=enable simulation messages
+  .USE_MEM_INIT(1),              // DECIMAL
+  .USE_MEM_INIT_MMI(0),          // DECIMAL
+  .WAKEUP_TIME("disable_sleep")  // String
+)
+xpm_memory_sprom_inst (
+  .douta(rom_data),                   // READ_DATA_WIDTH_A-bit output: Data output for port A read operations.
+  .addra(rom_address),                   // ADDR_WIDTH_A-bit input: Address for port A read operations.
+  .clka(clk),                     // 1-bit input: Clock signal for port A.
+  .ena(rom_enable),                       // 1-bit input: Memory enable signal for port A. Must be high on clock
+                                   // cycles when read operations are initiated. Pipelined internally.
+
+  .rsta(reset)                     // 1-bit input: Reset signal for the final port A output register stage.
+                                   // Synchronously resets output port douta to the value specified by
+                                   // parameter READ_RESET_VALUE_A.
+);
+
+// End of xpm_memory_sprom_inst instantiation
+				
+
+endmodule

doc/bugs.md

@@ -5,6 +5,7 @@
 
 ### Debouncer
 - Logic was fundamentally wrong
+- Found multiple logic bugs with testbench and then assertions
 
 ### Display Converter
 - Found a typo in a single digit

doc/rom_sd.gv

@@ -0,0 +1,23 @@
+digraph rom_sd {
+    Reset [shape = doublecircle, label = "RESET\nbuffer_half = 0\nrom_address = 0\nrom_enable = 1\nbuf.addr=0\nready=0"];
+    node [shape = circle];
+    Delay [label="DELAY\nrom_address++"];
+    WriteBuf [label="WRITEBUF\nbuf.ena=1\nbuf.data=rom_data\nbuf.addr++\nrom_addr++"];
+    EndWrite [label="ENDWRITE\nbuf.ena=1\nbuf.data=rom_data\nbuf.addr++\nready=1"];
+    Wait [label = "WAIT\nbuf.ena=0"];
+
+    Reset -> Reset [label="reset"];
+    Reset -> Delay [label="!reset"];
+
+    Delay -> WriteBuf;
+
+    WriteBuf -> WriteBuf [label="buf.addr < 1023"]
+    WriteBuf -> EndWrite [label="buf.addr == 1023"]
+
+    EndWrite -> Wait;
+
+    Wait -> Wait [label = "buffer_half == buf.address_half"]
+    Wait -> Delay [label = "buffer_half != buf.address_half"]
+
+
+}

lib/audio_buffer_interface.sv

@@ -0,0 +1,18 @@
+interface audio_buffer_interface;
+    logic [10:0] addra;
+    logic [7:0] dina;
+    logic clka;
+    logic ena;
+    logic address_half;
+
+    modport driver (
+        output addra, dina, clka, ena,
+        input address_half
+    );
+
+    modport receiver (
+        input addra, dina, clka, ena,
+        output address_half
+    );
+
+endinterface